NEYRA PLS - Crack Joint Thermo-Sealant 1/2 Pallet (35) 30 lbs Boxes
- Climatically Engineered: Formulated for a firm set in warmer climates.
- Tough & Pliable: A no tracking formula for parking lots.
- Sets Firm & Fast: You can seal in 15 minutes or less.
- No Bleed Through: Ideal for crack filling under sealcoating, slurry seals and overlays.
- Optimum Texture: Granular rubber improves sealcoat adhesion.
- Proven Performance: many ASTM, AASHTO and Federal specs for crack sealants including ASTM D1190 and D6690 Type I.
Heating:
PLS can only be properly heated in a kettle with both agitation and temperature control. The range of safe heating temperature for the product is between 325-375° F. Material can be pumped or gravity fed into crack/joint. Care should be taken to minimize the amount of sealant left on the pavement surface.
Application:
Install heated sealant directly into cracks/joints not to exceed a 4-inch-wide band. Thickness should be controlled to not more than 1/8 inch above pavement surface. Finished sealed cracks and joints will be uniformly level. Refill to achieve a flush to 1/8-inch concave surface appearance. One pound of PLS will fill the following lineal feet:
Free Shipping Only Applies to Shipments in the Continental United States. Residential, limited access, lift-gate and deliveries to remote areas will incur extra charges.