NEYRA PLS - Crack Joint Thermo-Sealant Pallet

NEYRA PLS - Crack Joint Thermo-Sealant Pallet (70) 35 lbs Boxes

• Climatically Engineered: Formulated for a firm set in warmer climates.
• Tough & Pliable: A no tracking formula for parking lots.
• Sets Firm & Fast: You can seal in 15 minutes or less.
• No Bleed Through: Ideal for crack filling under sealcoating, slurry seals and overlays.
• Optimum Texture: Granular rubber improves sealcoat adhesion.
• Proven Performance: many ASTM, AASHTO and Federal specs for crack sealants including ASTM D1190 and D6690 Type I.

Heating:

PLS can only be properly heated in a kettle with both agitation and temperature control. The range of safe heating temperature for the product is between 325-375° F. Material can be pumped or gravity fed into crack/joint. Care should be taken to minimize the amount of sealant left on the pavement surface.

Application:

Install heated sealant directly into cracks/joints not to exceed a 4-inch-wide band. Thickness should be controlled to not more than 1/8 inch above pavement surface. Finished sealed cracks and joints will be uniformly level. Refill to achieve a flush to 1/8-inch concave surface appearance. One pound of PLS will fill the following lineal feet:

Free Shipping Only Applies to Shipments in the Continental United States. Residential, limited access, lift-gate and deliveries to remote areas will incur extra charges.

NEYRA PLS PRODUCT DATA SHEET

NEYRA PLS SAFETY DATA SHEET