NEYRA Spec+Plus - Crack Joint Thermo-Sealant Pallet

NEYRA Spec+Plus – Crack/Joint Themo-Sealant Pallet – (70) 30 lbs boxes

Spec+Plus is a highly modified, single component, hot applied, rubber/asphalt joint and crack sealant. Furnished as a solid, it is an elastomeric sealant which is compatible with and bonds aggressively to clean and dry concrete or asphalt pavements.

• Pure Polymer Performance: Longest lasting crack / joint sealant for parking lots and roads.
• Resilient: Formulated to perform under the extreme expansion and contraction conditions of colder climates.
• Contains No Fillers: Will not settle, jell or coke in kettle.
• Energy Savings: Low pour temperature of 325° means lower heating cost and less time on the job.
• Sets Firm & Fast: You can open pavement to traffic in 15 minutes.
• Proven Performance: Meets and exceeds the standards of ASTM, AASHTO and federal specs for crack sealants, including D1190, D3405 and D6690 Type II & III.

Heating:

Spec+Plus should be heated in a vessel designed for heating hot pour crack sealants. Some means of agitation and monitoring of temperature are recommended. The range of safe heating temperature for the product is between 350-400° F. Overheating Thermoflex beyond this recommended range can degrade the material and create a fire hazard. Thermoflex is suitable for use in a direct fire melter or an oil-jacketed double boiler. It is also an excellent product for use through pumping type kettles.

Application:

Install heated sealant directly into cracks/joints not to exceed a 4-inch-wide band. Thickness should be controlled to not more than 1/8 inch above pavement surface. Finished sealed cracks and joints will be uniformly level. Refill to achieve a flush to 1/8-inch concave surface appearance. One lb. of Thermoflex will fill the following lineal feet:

Free Shipping Only Applies to Shipments in the Continental United States. Residential, limited access, lift-gate and deliveries to remote areas will incur extra charges.

NEYRA Spec+Plus Product Data Sheet