As a contractor, you want to limit how much you redo so you can maximize your profits. But you could be making small mistakes that are choking your margins over time. Here are some common mistakes contractors make that cost money, and how you can avoid them for a more profitable outcome on each job.
Paint doesn’t bond well to a dirty or wet surface. Oil residue, dust, and moisture all break down adhesion, which leads to peeling within weeks. That means a callback, more paint, and lost time.
Sweep and blow off the surface before you start. If there's any oil staining, treat it first. Painting over a compromised surface guarantees a short lifespan on the work.
Not every paint works on every surface or in every climate. Oil-based paint takes longer to dry and can crack in colder temps. Water-based paint dries faster but needs the right conditions to cure properly.
If you're using whatever's cheapest without checking specs, you're setting yourself up for fading, cracking, and early wear. The paint has to match the surface type and the weather you're working in.
Parking lot striping follows standard dimensions for a reason. Lines that are too narrow or unevenly spaced reduce the number of usable spots and can put the property owner out of compliance with local codes.
Measure before you roll. A few extra minutes of layout saves you from restriping a lot you just finished.
Temperature and humidity directly affect how paint dries. Below 50°F, most paints won't cure correctly. High humidity extends dry time and can cause streaking or bubbling.
Check conditions before you schedule the job. Painting on a borderline day creates preventable problems.
A clogged tip or inconsistent spray pattern wastes paint and produces uneven lines. If you're not checking your equipment before each job, you'll notice the problem mid-stripe when it's already too late to fix cleanly.
Inspect tips, pressure settings, and paint flow before you start. Catching a clog before the job costs you five minutes. Catching it after costs you the whole line.
Don't let these common line striping mistakes cost you money. Most are preventable. By checking if you're doing any of these on your current jobs and taking steps to fix them before you stripe, you can start seeing better results and fewer callbacks on each project.
At NAC Supply, we carry high-quality, affordable line striping tools, including stripers and marking paint. Better tools can maximize your efficiency and raise the quality of your work for cleaner lines that will have clients calling you back.
Comments will be approved before showing up.
